ActiVHeat MOTO12 Heated Sock Liners
Operating Instructions
DO THIS NOW: Check sock liner sizing is correct before opening other packages.
Thank you for your purchase of the ActiVHeat MOTO12 Heated Sock Liners. These liners were designed by ActiVHeat to fit comfortably beneath an outer riding boot and preferably over a thin inner sock and provide pleasant, comfortable far infra-red heat when used properly.
IMPORTANT SAFETY WARNINGS:
1. DON’T REMOVE SOCK LINER WITHOUT FIRST OPENING VELCRO CLOSURE.
2. To avoid internal damage, remove sock liner by opening Velcro style closure, gently pulling down the sock from the rear of the cuff, inverting the sock as it is removed.
3. These liners get HOT and MUST be used with a heat controlling device andNEVER be directly connected to a vehicle or using an on/off switch.
Connecting sock liners through pants liner:
These sock liners are designed to be connected to many heated pants liner ankle leads or to be used on their own. Follow the manufacturer’s requirements for connecting socks to a heated pant liner and ensure you are using a suitable heat controller. Never operate a heated pant liner or heated sock liners without a variably-adjustable temperature controller. Begin with a medium heat setting, adjusting the temperature as required. This installation is ideal for operation in winter months while riding on snowmobiles, ATV's, and motorcycles.
Connecting sock liners directly with a single controller:
If you are using your sock liners without a heated pants liner, you will need to connect your socks to the vehicle's battery. To do this, you will need to connect and install the direct-to-battery harness to the positive (+) and negative (-) terminals of the battery. This cable is provided with all of ActiVHeat's Controllers. See installation instructions for the harness for more information.
1. You will then need to bring the power to the socks through the use of our included electrical splitter cable. This splitter cable needs to be run on the inside of your pant legs and be connected to each sock liner. Never use the electrical splitter cable externally to outer riding pants, they are only designed to be run internally under outer pants.
2. Once each splitter cable lead plugs are run down the pant legs, connect the socket on each of the socks to the plugs and connect the other end of the splitter cable to the controller.
3. Begin with a medium heat level setting, adjusting the temperature as desired.
Usage and Care Instructions
Your sock liners are hand washable with a mild detergent. Rinse and hang dry. Do not wring excess water as this can damage the liner. Do not dry in clothes dryer. Do not dry clean. Do Not Bleach, Do not Iron.
Warranty Information
Customers who are new to heated clothing naturally worry about how well the heating elements will wear over time. No matter how often you fold and store your heated clothing, we are confident that our gear will continue to function flawlessly.
ActiVHeat's MOTO12 Sock Liner and Splitter Cable One (1) Year Limited Warranty.
Every ActiVHeat MOTO12 sock liner and splitter cable is thoroughly inspected and tested before leaving the factory and when purchased from an approved United States retailer is warranted against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from date of purchase by the original purchaser ("Garment Warranty Period"). If a defect arises and, after examination, a valid claim is received within the Garment Warranty Period, at its option, Adventive IDEAS will either 1) repair the defect, using new or refurbished replacement parts, or 2) replace the product with a new product that is at least functionally equivalent to the original product.
Heat Controller Three Year (3) Year Limited Warranty.
Heat Controllers are warranted against defects in materials and/or workmanship under normal use for a period of THREE (3) YEARS from date of purchase by the original purchaser ("Controller Warranty Period"). If a defect arises and, after examination, a valid claim is received within the Controller Warranty Period, at its option, Adventive IDEAS will either 1) repair the defect, using new or refurbished replacement parts, or 2) replace the product with a new product that is at least functionally equivalent to the original product.
Limits and Exclusions : A replacement product or part, including a user-installable part installed in accordance with instructions provided by Adventive IDEAS, assumes the remaining warranty of the original product or part. When an item is exchanged, any replacement product or part becomes your property and the replaced product or part becomes Adventive IDEAS' property. Coverage under both the Garment Warranty and the Controller Warranty is limited to the United States of America, including the District of Columbia and the U.S. Territories of Guam, Puerto Rico, and U.S. Virgin Island.
These Limited Warranties apply only to products that can be identified by the "ActiVHeat" logo affixed to them or their packaging. The Garment Warranty does not apply to any non- ActiVHeat branded products. Both warranties do not apply to: a) damage caused by failure to follow instructions relating to product's use, washing instructions or the installation of components; b) damage caused by accident, abuse, misuse, fire, floods, earthquake or other external causes; c) damage caused by service performed by anyone who is not authorized by Adventive IDEAS; d) a product or part that has been modified to alter functionality or capability; (e) damage due to normal wear and tear which is affected by how the product is worn and how often it is worn; and (f) any purchaser who bought the product from a reseller or distributor not authorized by Adventive IDEAS, including but not limited to purchases from internet auction sites.
ADVENTIVE IDEAS SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THESE WARRANTIES. TO THE EXTENT PERMITTED BY APPLICABLE LAW, ADVENTIVE IDEAS DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS. IF ADVENTIVE IDEAS CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES, THEN TO THE EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS EXPRESS WARRANTY.
Some states disallow the exclusion or limitation of incidental or consequential damages or how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.
Warranty Information
Customers who are new to heated clothing naturally worry about how well the heating elements will wear over time. No matter how often you fold and store your heated clothing, no matter how many years you own your heated clothing, we are confident that our gear will continue to function as intended. When you purchase an ActiVHeat MOTO12 series heated garment within the United States, the electrical components of the garment are warrantied to be free from factory defects in materials and workmanship for 24 months from the date of purchase.
All other [non-electrical] components of the garment are warranted to be free from factory defects in materials and workmanship for a period of one (1) year from the date of the initial purchase. If you find anything wrong with the sewing or materials of any clothing you buy from us within the first year due to a manufacturing defect, or if any problem develops during the first year due to our negligence or mistake, we will fix it or replace it for free. All you do is pay for the shipping and handling.
Temperature Controllers are warranted from factory defect for three years from the date of the initial purchase. Any alteration of the product voids the warranty.
Toasty Toes 
